#Swing stage scaffold safety checklist professional#
#Swing stage scaffold safety checklist free#

(1) A constructor shall appoint a supervisor for every project at which five or more workers will work at the same time.

Make sure that the scaffold is not overloaded.ġ4.Make sure that fittings and gear, including base plates or wheels are installed according to the manufacturer’s instructions.Make sure that the scaffold is tied at intervals of maximum 3 times the least lateral dimension measured at the base. Supported scaffolds become unstable if higher than 4 times the base.

#Swing stage scaffold safety checklist free#

Ensure that all components are free of defects and compatible with the scaffold.

Ensure that there are no missing components.

Lists with the components to be inspected are also included in each scaffold-specific CSA standard. The drawing design should include a list with the critical parts that must be inspected.

When inspecting the components of a scaffold, a checklist that includes all critical components of the scaffold can be helpful.

What to look for when inspecting a scaffold

#Swing stage scaffold safety checklist professional#

An employer responsible for constructing a silo using a centre pole scaffold must keep with the scaffold, while the scaffold is in use, any written opinion by a professional engineer regarding the scaffold and a record of the frequency of use of the scaffold during construction.

The constructor must keep the records of inspections at the project location (where the scaffold is used).

, and multi-point suspended work platform

The person who carries out the pre-use inspection of a scaffold must record in writing that the scaffolds was erected in accordance with the design drawings.Ī professional engineer must inspect a suspected scaffold or suspended platform.

Multi-point suspended work platforms, suspended platforms, scaffolds and boatswain’s chairs operated by mechanical power must be inspected at least each week by a supervisor or a competent person appointed by the supervisor. If a scaffold is erected in an environment that could affect its structural components, (such as a corrosive environment), the adequate inspection frequency should be determined by a competent person.

one year since erection or inspection, if used for a stave silo.

two years since erection or inspection, if used for a monolitical silo, or.

the twenty fourth erection since the latest inspection, or.

Multi-point suspended scaffolds must be inspected by a professional engineer before each use at a new location (new anchorage point)Ĭentre pole scaffolds must be inspected by a professional engineer at the earliest of:.

Centre-pole scaffolds used in silos, suspended scaffolds with more than one platform, suspended platforms that, together with its components, weigh more than 525 kg and multi-point suspended work platforms must be inspected or a report prepared by the appropriate person.

This inspection must be stated in writing.

Supported scaffolds and work platforms must be inspected by a professional engineer or a competent person designated by the supervisor.

confirm that the scaffold is maintained in good condition and has not suffered any deformationīefore placed in service a scaffold must be inspected to conform that the erection has been done in accordance with the design drawings.

verify that the use and the load of the scaffold correspond to the structural specifications of the scaffold.

verify that all required safeguards are correctly installed.

identify any defects of the structure (e.g., missing parts, improperly fitted components, inadequate components), supports, or accessories.

confirm that the erection of the scaffold followed the design drawing before the scaffold is used.

Where the legislation is less specific, such as in providing details about elements to be inspected and frequency of periodical inspections, it is recommended to follow the guidelines provided by the applicable standards.ĭuring a general inspection of a scaffold, The Ontario Construction Projects Regulations establish certain scaffold-specific requirements for pre-use inspections and frequency of inspections.